User Tools

Site Tools


technical_logs:yonge_dundas_square

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
technical_logs:yonge_dundas_square [2011/08/06 12:47]
gabe
technical_logs:yonge_dundas_square [2013/09/28 16:06] (current)
Line 1: Line 1:
 +====== September 6, 2012 ======
 +Two nights ago, open-mesh reported that the gateway router went down. I went by today, and couldn'​t connect to either the wirelesstoronto or wt-yds networks. I went in, and our equipment was unplugged. I asked, and apparently some people had been in to install security cameras. I plugged it back in and it came back up.
 +
 +====== April 30, 2012 ======
 +I got an open-mesh email notification on Apr 8 that the network went down. I dropped by a couple of times between then and now to ssh into and reboot the gateway router, but it didn't fix anything. (The problem was with the NS2.) Today I got an email from Laura at YDS, and she confirmed that she could let me into the TO Tix booth. I installed a timer which will reboot everything (NS2, Linksys router and DSL modem) every morning at 3:30ish. Once I installed it and powered everything back on, the network came up quickly.
 +
 +====== February 23, 2012 ======
 +I went back, and the situation was the same. I went in, powercycled the NS2, and it came back up within a minute or so. As of right now the dashboard isn't yet reporting that it's back up, but I was able to connect to wirelesstoronto easily.
 +
 +====== February 7, 2012 ======
 +Cloudtrax (the open-mesh dashboard) reported that all mesh nodes at YDS went down on Friday. I went this morning to check. Normally this is caused by the Linksys router (which runs PPPoE) going down. But today I was able to connect to the Linksys router and get online. The ticket office was closed, so I couldn'​t get in to reboot the NS2. I'll try to go by later to try that.
 +
 ====== August 6, 2011 ====== ====== August 6, 2011 ======
 I rebooted the Linksys router, and no luck. I plugged my laptop into the modem and it couldn'​t find a PPPoE server. I rebooted the modem, and it started working. I intended to bring a lamp timer that would auto powercycle the whole rig every night, but couldn'​t find one. The modem problem is, as far as I can tell, a new one, so maybe it was a fluke. I rebooted the Linksys router, and no luck. I plugged my laptop into the modem and it couldn'​t find a PPPoE server. I rebooted the modem, and it started working. I intended to bring a lamp timer that would auto powercycle the whole rig every night, but couldn'​t find one. The modem problem is, as far as I can tell, a new one, so maybe it was a fluke.
technical_logs/yonge_dundas_square.1312652834.txt.gz ยท Last modified: 2013/09/28 16:06 (external edit)