Differences

This shows you the differences between two versions of the page.

--- technical_logs:yonge_dundas_square [2010/07/16 15:33]
gabe
+++ technical_logs:yonge_dundas_square [2013/09/28 16:06] (current)
@@ Line 1: / Line 1: @@
+====== September 6, 2012 ======
+Two nights ago, open-mesh reported that the gateway router went down. I went by today, and couldn't connect to either the wirelesstoronto or wt-yds networks. I went in, and our equipment was unplugged. I asked, and apparently some people had been in to install security cameras. I plugged it back in and it came back up.
+====== April 30, 2012 ======
+I got an open-mesh email notification on Apr 8 that the network went down. I dropped by a couple of times between then and now to ssh into and reboot the gateway router, but it didn't fix anything. (The problem was with the NS2.) Today I got an email from Laura at YDS, and she confirmed that she could let me into the TO Tix booth. I installed a timer which will reboot everything (NS2, Linksys router and DSL modem) every morning at 3:30ish. Once I installed it and powered everything back on, the network came up quickly.
+====== February 23, 2012 ======
+I went back, and the situation was the same. I went in, powercycled the NS2, and it came back up within a minute or so. As of right now the dashboard isn't yet reporting that it's back up, but I was able to connect to wirelesstoronto easily.
+====== February 7, 2012 ======
+Cloudtrax (the open-mesh dashboard) reported that all mesh nodes at YDS went down on Friday. I went this morning to check. Normally this is caused by the Linksys router (which runs PPPoE) going down. But today I was able to connect to the Linksys router and get online. The ticket office was closed, so I couldn't get in to reboot the NS2. I'll try to go by later to try that.
+====== August 6, 2011 ======
+I rebooted the Linksys router, and no luck. I plugged my laptop into the modem and it couldn't find a PPPoE server. I rebooted the modem, and it started working. I intended to bring a lamp timer that would auto powercycle the whole rig every night, but couldn't find one. The modem problem is, as far as I can tell, a new one, so maybe it was a fluke.
+I waited a few minutes and still couldn't connect to the wirelesstoronto network. I rebooted the NS2 and it came up pretty quick.
+====== July 13, 2011 ======
+It's down again; for four days according to the open-mesh dashboard. I went by this morning and tried the same thing I did last time. The difference was that rebooting it didn't bring the Internet connection back up. The next thing I would've tried is powercycling the modem (or maybe before that, plugging my laptop into it to see if it can get on, to try to isolate the problem to either the modem or the router). But the TO Tix booth is only open after noon.
+Once it's back online, maybe it'd be a good idea to set a cronjob to reboot it every night. Who knows; it might help.
+====== July 5, 2011 ======
+Late last week I got an email from the YDS folks saying that the wifi was down, and that "someone" had tried rebooting the modem, but it was still down. I was out of town, so I went by on Tuesday afternoon. I didn't even need to go inside...
+My laptop connected immediately to the wirelesstoronto network, and got a DHCP IP, 192.168.1.150. (Clearly, this came from the Linksys router and not the mesh router.) I sshed to 192.168.1.1 (the Linksys). It had 64 days uptime, 1.5GB transferred on VLAN1, but wasn't online. I used "ps -ef" to get the pppoe commandline, killed the process, and launched it again. It immediately went online, but wasn't doing the routing properly. (The router was online, but my laptop wasn't.) So I rebooted the router and it came up fine.
+At some point in the process the wirelesstoronto network disappeared, so I had to connect to wt-yds. A few minutes after the reboot wirelesstoronto came back up.
+It seems like the problem is that the PPPoE client on the Linksys router flakes out about once every month or two, and the router needs to be rebooted. Since we're not running wifidog on the Linksys router, we're not currently monitoring it. I tried to install the om-checkin script, but there wasn't enough space on the router. <code>
+** had to make a copy first, 'cause it was linked to the read-only
+cp /etc/ipkg.conf /etc/i
+mv /etc/i /etc/ipkg.conf
+vi /etc/ipkg.conf
+ipkg update
+ipkg install microperl curl
+cd /sbin
+wget http://wirelesstoronto.ca/dist/om-checkin.pl
+cd /etc
+wget http://wirelesstoronto.ca/dist/om-checkin.conf.pl
+crontab -e
+* add line: */2 * * * * /sbin/om-checkin.pl
+killall crond
+/usr/sbin/crond -c /etc/crontabs
+** I had to install libopenssl, but there wasn't enough room, so:
+ipkg remove wifidog
+</code>
+Still not enough space, so I gave up. The microperl binary is 1MB! If we could port the om-checkin script from perl to bash, we'd be way better off.
+====== October 28, 2010 ======
+The open-mesh dashboard is indicating that the network has been down for 34 days.  I went to the square, was able to connect to wirelesstoronto but didn't get an IP address.  I connected to wt-yds, got an IP address, but wasn't able to ping the Internet from that router.  I fumbled around with udhcp for a while, but eventually just issued a 'reboot'.  As soon as it came back, everything was fine.
+====== July 23, 2010 ======
+It went down again.  This time I went by, the wirelesstoronto ssid was visible, but didn't do anything (not even a dhcp address).  I connected to wt-yds, and surprisingly, I could ping the Internet.  So it seems like the problem was with the open-mesh router?  I went into the office.  It had fallen off the wall again -- since the red vinyl went up, the suction cup doesn't stick.  I took it off, moved the Linksys router to under the desk, and used the big clip to attach the router to the column.  (This also moves a bunch of the spaghetti to below the desk, which is nice.)  I had unplugged everything in the process.  When it plugged it back in, it took a couple of minutes (during which totally weird stuff was happening) before it all started working ok.
+====== July 18, 2010 ======
+It went down again at about 7am yesterday.  I rebooted the wt-yds (Linksys) router (because I haven't yet figured out how to reset the pppoe connection), and it came back up.
 ====== July 16, 2010 ======
 The open-mesh dashboard reported that the gateway and security routers went down on Wednesday (and the infobooth 3 days ago).  I couldn't ping the linksys router via vpn.  I went by today and could connect to the linksys router wirelessly.  It had no 'net connection.  I tried ifdown ppp0; ifup ppp0 and it didn't seem to work (or maybe I got impatient).  I rebooted the router (from the commandline) and when it came back up everything seemed fine.  Wouldn't it be easy to put a cronjob on to reboot (or reset pppoe) if it loses connectivity?

Wireless Toronto

User Tools

Site Tools

Differences

Page Tools